1. How to add 70mai Dash Cam A800 on the 70mai app?

(1). Open the 70mai app and tap > Add Device.

(2). Find 70mai Dash Cam A800 in the device list, and tap it to enter the connection process.

(3). Turn on the Dash Cam’s Wi-Fi hotspot and then complete the connection following the prompts on the app screen.

2.What can I do on the 70mai app?

After adding the dash cam on the 70mai app, you can do the followings:

Preview

Preview what the dash cam is recording. Tap the icon  in the lower right corner for full-screen display. The dash cam cannot be operated when it is connected to a mobile phone.

 

 

Take Photo

Tap the  button and the dash cam will snap as a feedback. The photo will be stored in the app album and the SD card at the same time.

Album

Tap the  button to enter the album and view the videos and photos stored in the MicroSD card. You can view or download videos to your mobile phone’s local album.

The album contains the following content:

• Normal(including front camera and rear camera videos)
• Event(emergency videos)
• Parking
• Photos

After entering the specific album list, you can view the content or download it to your mobile phone’s local album.

Settings

Tap the icon on the upper right corner to enter the setting page and you can set various functions of the dash cam.

Note: Due to different versions of 70mai Dash Cam A800 and 70mai app, the system screen displays may be slightly different. The specific functions are subject to the actual displays of the device and 70mai app.

2. Why there is lag when I preview the screen on my mobile phone?

• Please check if the mobile phone Bluetooth is turned on. If so, the preview screen may occasionally be lagged, because Wi-Fi and Bluetooth interfere with each other and compete for channels. In order not to affect the preview, you can turn off the Bluetooth.
• If the Bluetooth is off, there may be a device problem. Please contact customer service.

3. Why can’t my device be connected to two mobile phones at the same time?

Currently, the device does not support connection to two mobile phones at the same time. To connect to another mobile phone, please delete the device on the previous mobile phone.

4. Q. How to update firmware on the 70mai app?

Please follow the steps below to perform the firmware update.

(1). Open the 70mai app and tap   > My devices. In the device list, find 70mai Dash Cam A800.

(2). If there is available update of the firmware, a small red dot displays on the right side of the device name. Tap the name to enter the detailed device page and tap Firmware Update > Download New Firmware Version.

Note: Firmware download requires disconnecting the Wi-Fi connection to the dash cam.

(3). After the download is completed, return to the homepage and reconnect the Dash Cam. After entering the preview screen, there will be a prompt Available update package detected. Push it to the Dash Cam? Tap Push and then connect the dash cam Wi-Fi to complete the push.

(4). After the dash cam receives the update package, complete the update in the dash cam  screen.

Note: The dash cam should be connected to an external power supply during the update.

(5). After the update is completed, you can delete the local firmware package by tapping  in the upper right corner of the firmware update page.