Binding the hardwire kit

This product needs to be bound in the 70mai app so as to provide the Internet service to the main device. Before binding, prepare the followings:

1. Inserting the SIM card
When the engine is turned off, insert the SIM card into the SIM card slot of the hardwire kit.

2. Connecting the hardwire kit and the main device
Refer to the Installation chapter in this user manual to correctly install the hardwire kit and connect it to the main device using the connecting cable.

After the preparations, follow the steps below to bind the hardwire kit.

1. Park the car in a place where your phone’s internet signal is good. And then start the car to turn on the main device.
2. Add the main device in the 70mai app following the user manual and user guide of the main device.
3. Open the 70mai app and enter the plug-in page of the main device, and tap 4G module. For some main device models, you may need to find the main device card in the 70mai app and tap Add 4G.
4. Bind the hardwire kit following the instructions on the screen. The main device’s network service will be available once the hardwire kit is bound successfully.
   Note: During the binding, keep your phone close to the main device without obstacles in-between.