1. Installing the electrostatic sticker
Paste the electrostatic sticker on the recommended area on the front windshield. Press the sticker to remove air bubbles out.
Avoid the edge of the windshield and select the flat and smooth area for the installation. Keep windshield clean and dry without liquid residue to prevent the sticker from losing adhesion and dash cam from dropping.

2. Installing the mount
Attach the mount into the mount slot and slide up.

3. Installing the memory card
Insert the memory card into the card slot.

4. Mounting the dash cam
Paste the dash cam onto the electrostatic sticker.

5. Routing cable
Route the power cord to the cigarette lighter and connect to power.

Notes:
• Use the included wiring trim tool to hide the power cord underneath the vehicle’s headliner and rubber seal along the A-pillar.
• Depending on the vehicle, the cigarette lighter socket may be located in a different position. The above figure is for reference only.

6. Adjusting the camera angle
Turn on the dash cam and adjust the camera angle based on the preview screen.