Product features

1. Replacing or connecting the parking surveillance cable of the 70mai brand ensures the normal performance of the dash cam’s parking surveillance function.
   • Replacing the standard parking surveillance cable (e.g., 70mai hardwire kit). The Type-C output cable serves as a replacement for the original parking surveillance cable.
   • Connecting the standard parking surveillance cable or parking surveillance cable with 4G function (e.g., 70mai 4G hardwire kit) can be achieved using the parking surveillance cable adapter. This adapter simulates the VCC, ACC, and GND three-way outputs from the vehicle’s fuse box to adapt to the original parking surveillance cable.
2. Two charging methods are available:
   • Cigarette lighter charging: Plug the Cigarette lighter charging cable into your vehicle’s cigarette lighter (maximum 7A charging);
   • Fuse box charging: Connect the Fuse box charging cable into the vehicle’s fuse box for a faster charging speed (up to 11A charging).
3. After approximately 90 minutes of charging using the vehicle’s cigarette lighter or approximately 60 minutes of charging using the fuse box, the battery pack will power the dash cam for approximately 30 hours (based on the use of a 3W dash cam).
4. Compatible with both car (12V) and heavy-duty vehicle (24V) electrical systems.
5. The battery pack is charged during the vehicle’s operation and powers the dash cam simultaneously.
6. When the vehicle is turned off and enters the parking state, the battery pack automatically supplies power to the dash cam without relying on the vehicle’s battery.
7. After 2000 complete charge/discharge cycles at room temperature, the battery retains over 70% of its original capacity.

Note: The above data is sourced from the 70mai Lab. Actual usage may vary due to differences in individual products, usage conditions, and environmental factors. Please refer to the actual usage.