Installing the dash cam

1. Mount the dash cam on either of the recommended positions of the front windshield as appropriate: ①. Near the center of rearview mirror; ②. On the front of the passenger seat.

2. Attach the electrostatic sticker on the selected position, with the gap image facing upwards. Press the sticker to remove air bubbles out. Avoid the edge of the windshield and select the flat and smooth area for the installation.
Note: Keep windshield clean and dry without liquid residue to prevent the sticker from losing adhesion and dash cam from dropping.

3. Remove the protective film from the double-sided tape on the mount, Paste the dash cam on the electrostatic sticker. Make sure the gap on the adhesive sticker aligns with that on the electrostatic sticker and the display screen faces the car interior.

• The adhesion takes some time to stabilize. Therefore, keep it still for a while.

Installing the rear camera

1. Clean the installation surface of the rear windshield, and attach the supplied electrostatic sticker of the rear camera to the installation position of the rear camera.

2. Remove the protective film of the double-sided tape on the rear camera, and stick the rear camera onto the electrostatic sticker on the rear windshield. Pay attention to the direction of the rear camera.
* Pay attention to the installation direction of the rear camera. Avoid flipping of images on the device.


Press the rear camera against the rear windshield to secure the rear camera.

• The adhesion takes some time to stabilize. Therefore, keep it still for a while.

Connecting the dash cam

1. Connect the supplied Type-C connector of the power cord to the power port of the dash cam, and connect the other end to the car charger.

2. Use the supplied wiring crowbar to hide the power cord underneath the car roof lining and A pillar rubber sealing strip.

3. Route the power cord to the cigarette lighter socket, and insert the car charger into the cigarette lighter socket.

• The position of the cigarette lighter socket varies according to the car.

Connecting the rear camera

1. Connect the supplied rear camera signal cable to the rear camera cable.

2. Use the supplied wiring crowbar to hide the rear camera signal cable under the rubber sealing strip on the top of the rear windshield, C pillar (or D pillar), and top of a side window, and connect the signal cable to the dash cam.

3. Connect the supplied rear camera signal cable to the rear camera port on the dash cam.

Adjusting the camera angle

1. Turn on the engine of the car.
The dash cam automatically turns on and starts continuous recording.
2. Adjust the camera angle based on the image presented on the main screen when dash cam is turned on.

3. Press the function button under the icon on the device app to switch to the image of the rear camera.
4. Adjust the camera angle while checking the image of the rear camera on the dash cam.