Main screen

When the dash cam is turned on and a qualified microSD card is inserted, the dash cam will start recording automatically. The main screen displays real-time video.

* A qualified microSD card needs to be between 32GB–512GB in capacity and have a write speed of U3 (UHS-3) or higher.

Icon explanation 

Status bar icons:

1. Indicates that the dash cam is in normal recording mode. In the case of abnormal recording, the red dot will change to a white dot and  be displayed.
2. Indicates that the Wi-Fi hotspot is turned on. If it is turned off, the icon  will be displayed.
3. Indicates that the parking monitoring function (collision detection video recording or time-lapse photograph) is enabled.
4. Indicates that the time-lapse recording function is enabled.
5. Indicates that location information has been collected.
6. Displays the current date and time.
7. Displays real-time images recorded by the front camera.

Icons on the toolbar:

8. Press the lower function button to switch between the front camera, rear camera (Available only when installed.), and cabin camera views.
9. Press the lower function button to switch the cabin camera on/off.
10. Press the lower function button to turn the sound on/off.
11. Press the function button below to enter the settings.

Button Function

Power Button

• Press the power button to turn on the dash cam (The dash cam needs to be connected to an external power source).
• Press and hold the power button for about 3 seconds to turn off the dash cam.
• In the power-on state, press the power button to turn off/illuminate the screen.
• In the power-on state, press the power button twice to record an emergency video.

Function buttons

The function buttons have different functions in different interfaces. The specific function will be displayed in the function hint area at the bottom of the screen.

Indicator Light