1. Installing the electrostatic sticker

Clean your rear windshield and put the electrostatic sticker on the recommended upper area of the windshield, as shown in the figure. Press the sticker to remove air bubbles out.

2. Installing the rear camera

Paste the rear camera onto the electrostatic sticker.

3. Connecting the power supply

Connect the connector A and connector B together.

Run the connection cable along the top of the rear windshield, C-pillar, top of the side windows to the main device. Insert the AV/IN connector into the AV/IN port of the main device.

Note: The installation and wiring methods for different vehicles may differ from what described in the user manual. The installation shall be conducted by a professional installer.

4. Adjusting the camera angle

Turn on the main device and switch to rear camera recording screen. Adjust the camera angle based on the screen image to ensure that the camera is facing the back of the vehicle.