Binding the hardwire kit

This product needs to be bound to the 70mai app so as to provide network connection to the main device. Before binding, prepare the followings:

1. Inserting the SIM card
With the vehicle engine off, use the provided pin to poke out the SIM card tray, insert the SIM card into the tray, and place the tray back.

2. Connecting the hardwire kit to the main device
Refer to the Installation section in this user manual, correctly install the hardwire kit, and connect it to the main device using the Type-C plug of the hardwire kit.

3. Turning on network connection

After the preparations, follow the steps below to bind the hardwire kit.

1. Park the car in a place where your phone has strong, stable network connection. Start the engine and press the power button of the hardwire kit to turn it on.
2. Add the main device to the 70mai app following the user manual of the main device.
3. Open the 70mai app, find the main device card and tap Add 4G module.
4. Bind the hardwire kit as prompted by the app. The hardwire kit’s network service will be available to the main device once the hardwire kit is bound successfully.